Why Use Tubing Pumps?

Contamination-Free Pumping - The fluid only contacts the inside of the tubing (USDA and FDA listed for food handling) to ensure contamination-free pumping. No pistons, diaphragms, or valves contact the fluid stream.

 

Easy to Clean - Simply run sanitizing solution through the pump and flush with water - DONE!

 

Self Priming - Units don't need to be primed. Just turn on the pump and the fluid will be drawn into the pump, with a suction lift of up to 28 ft.

 

Anti-Siphoning - Two rollers are always squeezing the tubing closed so you don't lose prime when the pump is off

 

Easy Maintenance - The only wear item is the tubing, and that can be changed in a matter of minutes. No lengthy down times to disassemble a pump to replace a broken piston or cracked diaphragm. There is only one moving part, with no seals to leak, or valves to clog or wear.